P0341: Camshaft Position Sensor Circuit Range/Performance
Short answer: P0341 means “Camshaft Position Sensor Circuit Range/Performance”. It is a standard OBD-II code, so the basic meaning is the same on every car. Below is what it means on each of the 6 cars we cover, with a link to the full page for each car.
Standard OBD-II code Same meaning on all cars (SAE J2012).
P0341 on each car
| Car | Meaning on this car | Confidence |
|---|---|---|
| Toyota Passo (1st gen) | Camshaft Position Sensor A Range / Performance | low |
| Toyota Corolla (11th gen, E170) | Camshaft Position Sensor Circuit Range/Performance | medium |
| Toyota Corolla (10th gen, E140) | Camshaft Position Sensor Circuit Range/Performance | medium |
| Honda City (5th gen, GM2) | Camshaft Position Sensor Circuit Range/Performance | medium |
| Honda Civic (10th gen, FC) | Camshaft Position Sensor Circuit Range/Performance | medium |
| Suzuki Wagon R (Pakistan, K10B) | Camshaft Position Sensor Circuit Range/Performance | medium |
Symptoms
- Check engine light on
- The car will likely run with this code set, as it is often intermittent and
- Also because the PCM can often operate the vehicle in "limp-in/limp-home"
- Mode even with a cam sensor signal problem. There may be no noticeable symptoms
- Other than
- Poor fuel economy (if engine runs)
Likely causes
- Cam sensor wiring routed too close to spark plug wiring (causing interference)
- Poor wiring connection at cam sensor
- Poor wiring connection at PCM
- Bad cam sensor
- Damaged reluctor wheel
What to check, in order
- Read the code and freeze-frame data with an OBD-II scanner
- Check the connector and wiring of the part named in the code
- Test the part with scanner live data or a multimeter, using the values in the repair manual
- Fix the cause, clear the code and test-drive
Causes and checks above are the general meaning. The exact test steps and values differ by car: open your car’s page.