P1335 (blink 13) on Toyota Corolla E120: CRANKSHAFT POSITION SENSOR CIRCUIT MALFUNCTION(DURING ENGINE RUNNING)

Short answer: P1335 means “CRANKSHAFT POSITION SENSOR CIRCUIT MALFUNCTION(DURING ENGINE RUNNING)”. The car’s computer has found a fault in the EFI 1NZ-FE/2NZ-FE system and turns on the Malfunction indicator lamp (Check Engine). First check: workshop check order (RM821E): CHECK CRANK POSITION SENSOR(CHECK RESISTANCE) -> CHECK HARNESS AND CONNECTOR(ENGINE ECU−CRANK POSITION SENSOR) -> CHECK SENSOR ATTACHMENT PART -> CHECK CRANKSHAFT.

Code

P1335 · blink 13

System

EFI 1NZ-FE/2NZ-FE

Dashboard light

Malfunction indicator lamp (Check Engine)

Applies to

2NZ-FE 1.3 (PK XLi/GLi NZE120) and 1NZ-FE 1.5 (JDM NZE121/NZE124 Corolla/Fielder/Runx)

Confidence

high (official Toyota RM821E)

Source

toyotamanuals.gitlab.io

Symptoms and when it is set

1. (a) Engine speed at 1000r.p.m. (b) NE signal is not detected. (c) Instantanious open circuit

Likely causes

1. Crankshaft; Crank Position Sensor; Harness or Connector; Engin ECU

What to check, in order

1. Workshop check order (RM821E): CHECK CRANK POSITION SENSOR(CHECK RESISTANCE) -> CHECK HARNESS AND CONNECTOR(ENGINE ECU−CRANK POSITION SENSOR) -> CHECK SENSOR ATTACHMENT PART -> CHECK CRANKSHAFT

Related on this car

• All fault codes for this car
• Warning lights
• Where the parts are (parts map)
• Common problems

← P1315/15 P1346/18 →

Clearing the code does not fix the fault. If it comes back, the problem is still there. For brakes, airbags and steering, see a trained mechanic.