Bad injector. This is usually the cause of this code but doesn't rule out; The possibility of one of the other causes; Open in the wiring to the injector; Short in the wiring to the injector; Bad PCM

Read the code and freeze-frame data with an OBD-II scanner; Check the connector and wiring of the part named in the code; Test the part with scanner live data or a multimeter, using the values in the repair manual; Fix the cause, clear the code and test-drive

P0203 on Honda City GM2: Cylinder 3 Injector Circuit Malfunction

Short answer: P0203 means “Cylinder 3 Injector Circuit Malfunction”. The car’s computer has found a fault in the Engine system and turns on the Check engine light (MIL). First check: read the code and freeze-frame data with an OBD-II scanner.

Standard OBD-II code Same meaning on all cars (SAE J2012). Not checked against this car’s factory manual.

Code: P0203
System: Engine
Dashboard light: Check engine light (MIL)
Applies to: Generic OBD-II meaning. Not every code is used by this car.
Confidence: medium (generic OBD-II definition, not checked against the factory manual for this car)
Source: obd-codes.com

Symptoms and when it is set

Check engine light on

Likely causes

Bad injector. This is usually the cause of this code but doesn't rule out
The possibility of one of the other causes
Open in the wiring to the injector
Short in the wiring to the injector
Bad PCM

What to check, in order

Read the code and freeze-frame data with an OBD-II scanner
Check the connector and wiring of the part named in the code
Test the part with scanner live data or a multimeter, using the values in the repair manual
Fix the cause, clear the code and test-drive

Related on this car

Same code on other cars

← P0202 P0204 →

Clearing the code does not fix the fault. If it comes back, the problem is still there. For brakes, airbags and steering, see a trained mechanic.