PassoFix

P0335 (blink 13) on Toyota Passo (KGC10): Engine Revolution Sensor Circuit Malfunction

Short answer: P0335 means “Engine Revolution Sensor Circuit Malfunction”. The car’s computer has found a fault in the Engine control (EFI) system and turns on the Check engine light (MIL). First check: is the signal from the engine revolution sensor inputted to the EFI ECU?.

Code
P0335 · blink 13
System
Engine control (EFI)
Dashboard light
Check engine light (MIL)
Also sold as
Daihatsu Boon, Daihatsu Sirion (M300)
Applies to
1KR-FE: M300 (Sirion export = JDM Boon M300S/M301S(4WD? see gaps) & Passo KGC10/KGC15). JDM-spec ECU not separately documented | K3-VE: M301 (Sirion 1.3 = JDM Boon M310S? / Passo QNC10)
Confidence
high (factory manual, export spec)
Source
carmanualsclub.com

Symptoms and when it is set

  1. No revolution signal is inputted, even once, while the cranking is continued for several seconds.

Likely causes

  1. Open wire or short circuit for engine revolution sensor system circuit
  2. Engine revolution sensor
  3. EFI ECU

What to check, in order

  1. Is the signal from the engine revolution sensor inputted to the EFI ECU?
  2. Is the harness between the engine revolution sensor and the EFI ECU normal?
  3. Is the output of the engine revolution sensor normal?

Related on this car

Same code on other cars

← P0325/18 P0340/14 →

Clearing the code does not fix the fault. If it comes back, the problem is still there. For brakes, airbags and steering, see a trained mechanic.