Fault codes
Fault codes
Type a code (like P0300 or 17) or a symptom word (misfire, oxygen, airbag).
Showing 80 of 223. Type more to narrow down.
No scanner? No problem
How to read and clear codes
1 · Read the blinks
- Find the white 16-pin socket (DLC) under the dash near the steering column.
- Bridge terminals 5 and 13 with a short wire or paper clip.
- Turn the ignition ON (engine off).
- Count the check-engine light flashes: long flashes = tens, short flashes = units (e.g. 1 long + 7 short = 17).
- Match the 2-digit number to the list above (shown after the slash, e.g. P0300/17).
2 · Fix, then clear
- Repair the cause first — clearing a code does not fix anything.
- Ignition OFF. Pull the 15A EFI fuse in the engine-bay box beside the battery.
- Wait at least 60 seconds, refit the fuse.
- Drive and check the light stays off.