PassoFix

P0505 (blink 71) on Toyota Passo (KGC10): Idle Control System Malfunction

Short answer: P0505 means “Idle Control System Malfunction”. The car’s computer has found a fault in the Engine control (EFI) system and turns on the Check engine light (MIL). First check: is the harness between the stepper motor for ISC and the EFI ECU normal?.

Code
P0505 · blink 71
System
Engine control (EFI)
Dashboard light
Check engine light (MIL)
Also sold as
Daihatsu Boon, Daihatsu Sirion (M300)
Applies to
1KR-FE: M300 (Sirion export = JDM Boon M300S/M301S(4WD? see gaps) & Passo KGC10/KGC15). JDM-spec ECU not separately documented | K3-VE: M301 (Sirion 1.3 = JDM Boon M310S? / Passo QNC10)
Confidence
high (factory manual, export spec)
Source
carmanualsclub.com

Symptoms and when it is set

  1. When the signals are deviated from the specified range continuously over a certain length of time

Likely causes

  1. Open wire or short circuit for ISC system circuit
  2. Stepper motor for ISC
  3. EFI ECU

What to check, in order

  1. Is the harness between the stepper motor for ISC and the EFI ECU normal?
  2. Is the stepper motor for ISC operating normally?

Related on this car

Same code on other cars

← P0500/52 P0535/44 →

Clearing the code does not fix the fault. If it comes back, the problem is still there. For brakes, airbags and steering, see a trained mechanic.